- This topic has 4 replies, 4 voices, and was last updated 9 years, 9 months ago by
.
-
Posts
-
Looking at the circuit diagram, pin 5 on the hack port doesn’t seem to be used. If a wire mod was fitted between pin 3 of the det switch and pin 5 on the hack port, could pins 5 & 6 on the hack port be used to attach a second trigger such as a photo cell, trembler switch or tilt switch in parrallel?
And, is it possible to use a solar cell to power the device?
Yes, I think you are right about adding the second switch. connecting the DET button pin to ground through another switch would provide you a second way of triggering the detonation function.
The device draws quite a bit of current, so a solar cell may not work. It draws about 90mA when the clock display is on.
I wanted to make a connection 220-801 – dumps – test-king.com with a siren just like you.
could you help me by explaining what you have done on your side ?Here is an article that describes how to connect a relay so you can drive a siren:
https://nootropicdesign.com/projectlab/2014/10/28/using-a-relay-trigger-with-the-defusable-clock/
- You must be logged in to reply to this topic.