chipset pin output 5 volt

[pat.p]

Hi
im looking if is possible to program the chipset to have the ability to adding a pin to have a output of 5 volt when the clock reach 0:00 ?
is for a paintball project to connect a smooke grenade
thanks

[Michael]

Yes, that can be done. An LED pin can be repurposed, or one of the pins on the 6 pin header at the top of the board. Special coding is required but it is easy.

[pat.p]

Nice 🙂
Any help for the coding to use a led for the 5v output ?
And also i know rhe led is a flashingnoutput but can it be solid ?

[pat.p]

I dont have any experience for encoding or programation… So any help for that can be very helpfull 🙂 thanks

[Michael]

Well, I really can’t teach people how to code if they have no experience. If you are able to compile the Defusable Clock firmware in Arduino and upload code, then I can tell you the few lines of code you may need to change.

[pat.p]

I can upload the arduino with no probleme
The this i need to know is the line to change
I never work with arduino programmation before vut for that is not a probleme
Juste need to know where and what to change
Thanks for you help 🙂

[Author]

Posts