Shield doesn’t work with Arduino Fio?

Store › Forums › Video Experimenter › Bugs/Problems › Shield doesn’t work with Arduino Fio?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 9, 2014 at 7:40 pm #699
    mliu13
    Member

    I recently bought the Video Experimenter Shield and have run into problems in using it. I was first able to use this successfully when connected to the Arduino Uno. When I connected the shield to the Arduino Fio and uploaded the same code, the text overlay seems to go across the screen vertically really fast (at least that’s what I think is moving across the screen). Any suggestions on how to fix this problem? And sorry, I likely won’t be able to take a video of the outputs).

    Thanks

    July 11, 2014 at 9:21 pm #1953
    Michael
    Keymaster

    No, it’s not compatible with the Fio. The Fio is a 3.3V board, and runs at half the speed (8MHz).

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.