The text in overlay is very light/almost invisible.

Store › Forums › Video Experimenter › Bugs/Problems › The text in overlay is very light/almost invisible.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 22, 2017 at 3:45 pm #9291
    kommy
    Participant

    I have that problem with the video shield experiment, it’s a known problem and it’s fixed but I’m not capable! Sorry my ignorance, but where do I put the 300 ohm resistance? It Must be put on some pins on the Arduino Uno board? If I wanted to put a potentiometer, how should I do it?
    Is there a diagram? Can some kind soul provide me more detailed instructions???
    I beg you!

    October 23, 2017 at 10:37 am #9296
    Michael
    Keymaster

    A solution is to add a 330 ohm resistor in parallel with the 330 ohm resistor on the Video Experimenter board. It is labeled R2 on the board.

    October 24, 2017 at 6:22 pm #9300
    kommy
    Participant

    Ok, I need to solder the resistence… right? Sorry for my incompetence…

    October 24, 2017 at 7:37 pm #9302
    Michael
    Keymaster

    Yes, solder the 330 ohm resistor directly to R2 so that they are in parallel. This creates a resistance of 330/2 = 165 ohms.

    Like this:

    October 28, 2017 at 12:26 pm #9309
    kommy
    Participant

    Thank you so much!

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.