TVout + Nunchuk = Not working

Store › Forums › Hackvision › Game Development › TVout + Nunchuk = Not working

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 2, 2013 at 10:54 pm #655
    muessigb
    Member

    Hello Everybody,
    I’m trying to port the Poofys Adventure Game to use the Nunchuk.
    I’m really interested in your Hackvision, so I built one by my own using your schematic and some perfboard.
    Everything works fine with the Button controller, but when I use the Nunchuk.h in the Controllers Libary,
    my Arduino recieves X: 255 Y: 255 Z: 0 C: 0.
    The controller is working w/o the controller libary and w/o tvout.

    Hope you can help me 🙂

    BTW: I’m going to by a Hackvision soon at a german distributor.

    September 3, 2013 at 2:16 pm #1788
    Michael
    Keymaster

    Using a nunchuk with TVout is very tricky from a timing perspective. You will need to experiment with various delays before and after reading the nunchuk. See the other Hackvision games that use a nunchuk for some guidance. Bottom line: you need to experiment a lot until you get it working.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.