Problem with EthernetShied

Store › Forums › Video Experimenter › General Discussion › Problem with EthernetShied

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 3, 2014 at 10:54 pm #703
    GabrielVicente
    Member

    Please Help, I need to use VE and Ethernet shield, but do not work together,

    I know that:
    * VE uses digital pins 2, 6, 7, 8, 9
    * Arduino communicates with the Ethernet shield using the SPI bus. This is on digital pins 11, 12, and 13

    So what’s the problem? When I call: EthernetClient client, everything stop, if I comment this line, everything returns to run ok.

    Can someone help me?

    Att.

    Gabriel.

    August 4, 2014 at 5:49 pm #1971
    Michael
    Keymaster

    It’s unlikely that a shield as complicated as the Ethernet shield can be driven at the same time as the Video Experimenter. Most shields are not compatible with one another because of interrupts and timers. The VE requires use of timers and constant interruption with very precise timing to generate the video.

    August 8, 2014 at 8:11 pm #1975
    GabrielVicente
    Member

    Hello Michael, I solved the problem by using two Arduino and connecting them via tx-rx, now my problem is with accents, I’m monitoring the Brazilian tv, would I get accents? I change for PAM / NTSC, but he is doing a line break when it encounters an accent.

    Can you help me?

    Att.

    Gabriel.

    January 28, 2015 at 11:49 am #2154
    aahanifnoor
    Member

    I know that:
    * VE uses digital pins 2, 6, 7, 8, 9
    * Arduino communicates with the Ethernet shield using the SPI bus. This is on digital pins 11, 12, and 13

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.