Board/Code resetting

Store › Forums › Audio Hacker › Bugs/Problems › Board/Code resetting

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 9, 2015 at 4:37 pm #791
    Redbull
    Member

    Hello,

    I have assembled the board and have noticed a problem. The arduino resets every 2 seconds or so. Could this be a software or hardware problem?

    The only issue I had with assembly is I soldered one of the sockets in backwards, the chips are all correctly inserted though.

    November 13, 2015 at 1:42 pm #2366
    Michael
    Keymaster

    I would check to make sure that the VCC (5V) and ground pins are not shorted somewhere.
    You can also use the design info as a guide to check your connections: http://nootropicdesign.com/audiohacker/design.html

    November 20, 2015 at 6:51 am #2369
    Redbull
    Member

    Thanks, I’ll have a look. Appreciate the reply.

    January 23, 2016 at 11:39 am #2392
    adamp
    Member

    hi i upload the watchdog timer code. it works. but here is a problem. now every 15ms this arduino will be restart. so i can not upload another program. i think my arduino is totally dead. please help me

    • This reply was modified 10 years, 7 months ago by Michael.
    • This reply was modified 10 years, 6 months ago by Michael.
  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.