This topic contains 3 replies, has 3 voices, and was last updated by  Michael 5 years, 11 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #397

    jillesdotcom
    Member

    #1541

    Michael
    Keymaster

    Refer to Adafruit’s site for information on how to drive the 32×32 panel. You need to do lots of extra wiring. My product is not designed for the 32×32 panel, it’s designed specifically for the 32×16 panel.

    #1814

    CecilBush
    Member

    @jillesdotcom wrote:

    Can you help me fix a 32×16 on 32×32 led lights Matrix issue.

    Instead of using either top or bottom 16 LED’s. It uses LED ROW 1-8 & 17-24
    see: http://www.flickr.com/photos/jillesdotcom/8289870873/in/photostream

    Can I rewire the connection via a cable for instance. (switching pins) or is it solvable via software?

    Kind regards,
    Jilles Groenendijk

    Hello friend were you able to fix the matrix issue.. Please share some information as I am facing similar problem

    #1815

    Michael
    Keymaster

    CecilBush,

    Exactly what problem are you having? The previous poster was using the board on a 32×32 matrix (for which it is not designed)…

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.