Hiya,
I have build the clock and it is a great succes.
Now i would like to change and upload the code on the atmega but my converter is different from the adafruit friend converter.
The question is how do i connect the pins to the board.
The pins on the converter are: dtr / rxd /txd /+5V /GND /3V3
Hopefully you guys can help me out.
Best regards,
Sander
The Defusable clock uses the standard pinout: RTS, RX, TX, 5V, NC, GND
RTS and DTR are compatible. NC means “not connected”. RTS is on side marked “GRN” and ground is on side marked “BLK”. Green and black are the standard colors on FTDI cables.
Thanx a lot,and now when i read back it was a silly question, no connect means no connect lol. i Just changed the code for the random wires and now its time to upload it.
Thanks again for your time and effort.
Best Regards from the netherlands,
Sander
EDIT: it worked like a charm, now its time to insert the switches and make a nice video of it. And again thanks for your help.
Hey Michael,
Dont know if you like it but i saw this commercial in the netherlands and i think they are using your clock for it. https://www.youtube.com/watch?v=FmL0D64X3qQ