Forum Replies Created
-
Posts
-
8MHz is in another project. In your project, I want to simply spare everything according to the scheme and do not suffer with fill under Arduino, but simply program the microprocessor at a low level. Just writing the code into memory. Well, if not, then no. I am interested to do it yourself. Especially since most details are. Here the quartz lacked only and the printed circuit board. Although Arduino can be connected wires, there are not many parts there.
The project went to the masses, in commerce.
https://www.chipdip.ru/product0/9000482308I want to collect a media center for my daughter, I think add light effects based on Lumazoid. I have not yet decided to integrate into the ceiling, in the furniture or in the enhancer body.
There is a question on the firmware. I have a shawl with Arduino Nano, with a 328P 8MHz processor. With Sketches via Arduino IDE, I can not load. Complain that memory is missing. It would be easier for me to load a 16 bit HEX File through ProgrISP programmer. Can you post a file? And preferably settings of fuses.Hello!
A few questions on the project.
What is the frequency and size oscillator – 16mhz?
Is it possible to replace the processor on attiny88?
I can not edit the fee in Eagle – the conclusions C6 must be rotated 90 degrees, then it can be mounted lying, it will reduce the height of the device.
JP2 – IT IS ISP Connector?
Maybe there is already a collected firmware in HEX format, and installing fiom for programming via Progisp?
