RGB Matrix Backpack Connection Issue

Store Forums RGB Matrix Backpack Bugs/Problems RGB Matrix Backpack Connection Issue

This topic contains 1 reply, has 2 voices, and was last updated by  Michael 6 years, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #626

    I just purchased the “built and tested RGB Matrix backpack” and I am having issues connecting to it through the Arduino IDE.
    I am using the USB to TTL serial converter.

    Can you point me to a tutorial to make sure I have the right settings for the “Board” and “Serial Port” and “Programmer”

    #1711

    Michael
    Keymaster

    Everything you need is documented here: http://nootropicdesign.com/matrixbackpack/

    There is a section at the bottom of the page about programming it. All you need to do is select “Arduino Uno” as the board type. The Serial port selection should be the one for your serial converter cable (or board). The selection on my Arduino IDE for Programmer is “AVRISP mkll”, which is the default.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.