[laurent]

Hello with a little of delay our projects moves forward..
Our last one probleme, it is to get back a signal when “the bomb” “explodes” without using the signal of the buzer is this possible?

We want to keep ” beeps beep ” because if I use the signal of the buzer, I have to cut the “bips.bip” of the countdown.
We we would want a 2nd exit And not to use indicates him of the buzer.

Thank you Goodbye

[laurent]

Thank you mickael, I am going to try it

Goodbye

edit:

It’s perfect! ;D

I would make tries during the next part of Airsoft

Thank you very much

Goodbye

[laurent]

hello..

Thank you very much, take your time, it is not urgent.

That is what I made at the moment

1)
I deactivated all the ” beeps of the buzzer ” except the ” beeps of the buzzer ” when the bomb explodes.
Because I have one indicates to every “beep”, it is a problem!
Now, I just have the ” beep of the buzzer ” when the bomb explodes.
**************************************************************************************************

2)

==>If the bomb “explodes”, it cuts itself for a very long time. It is necessary to re-activate the system to continue, for it, it is necessary to use a key!!. (To reset it, it is necessary to use a key, no deceit like that!!!).

==>If the bomb is defused, it continues its cycle normal,And it posts the clock.

It allows to see if the bomb has was defused or if it exploded….

If the bomb exploded, nothing more is posted..And if the bomb has was defused, it posts the clock.

I am going to try to learn it more on this language. 😛 ;D ;D

Good holidays, and happy New Year.

[laurent]

Hello Mickael.

sorry…no!! :'( :'( 😛

I managed to modify some lines of the program.

but,I begin to learn the language “C”…and,later,the “C++”

Good Bye

[laurent]

Hello Mickael

you have no idea?

“0000” would have to display if the bomb exploded

Thank you

[laurent]

hello mickael,I disturb you a last time… ::) 😛

1)If the “bomb” was not defused, is it possible to make display only “0” or the other thing but not the clock??(message??for ex..)

2)And, if “the bomb” was defused, it is possible that the display indicates the time(weather) when it remains before it explodes?

3)And to finish, We Can have a firmware with only the management of the countdown? No management of the clock?

Many questions, I know, but it is what Airsoft associations wish. 😛 ;D

Thank you in advance I leave you with your work…

[laurent]

thank you …mickael…

I finished my 1st version of my “bomb”

I would make another “bomb” soon, even more beautiful..

Merry christmas and good year Mickael

[laurent]

hello,
Yes, I know that we can adjust the time but it is not it that I wish.

For the countdown,

For example, I would want that the countdown is in 45 minutes, without being obliged to Adjust…

At present, if we press on the red button, we have directly 10 seconds.

ex:
The player puts the bomb,press on the red button and the countdown begins directly in 45 minutes.(Without being obliged to pass by the Adjust.).

When I would have finished the bomb, we shall see only the digital display and the red button.

I would try immediately that I would have received the cable USB / serial

GoodBye

++

[laurent]

hello,
I received the material and that works perfectly.

I made a comparison between my assembly and yours, I see no difference.

I think that a been defective constituent(component). It was not of luck.

I thank you.

Good Christmas and new Year holidays

PS:
We can modify the bomb in this way: if I cut the bad thread, the countdown of the bomb goes faster?.

And as I said it to you, I should command you 2 other “bombs” in January or February.

[laurent]

ok thank you.

I am thus going to buy this battery.

Goodbye

[laurent]

@Michael wrote:

I am happy to refund your money or send a replacement (assembled/tested). Let me know which you would like.

thanks you..

I prefer to have a new ” bomb” and I indeed want to participate at the expense of port
I would send you 15 euro(20 dollards) for the transport costs

I give them to you by paypal?

PS:
I am going to try to find this problem >:D
I controlled everything twice!!And I am going to try to see where is the problem ??? ??? ??? ???

[laurent]

It is for it that I removed the condenser,
The regulator no chauufe not any more, but that does not work .
I have 9v in the regulator(on the pin)

[laurent]

yes,

I checked it before connecting.
I also checked(controlled) the voltage to be safe(

8,8v
9v

700ma

[Author]

Posts